datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

501930-0200 데이터 시트보기 (PDF) - Molex Connectors

부품명
상세내역
제조사
501930-0200
Molex
Molex Connectors 
501930-0200 Datasheet PDF : 7 Pages
1 2 3 4 5 6 7
Hand Crimp Tool For 1.25mm (.049") Pitch Crimp Terminals
LOCATOR
PUSHED THRU
TOOLING
LOCATOR
RELEASE
LOCATOR BUTTON
LOCATOR
BUTTON
PUSHED IN
TERMINAL
Figure 3
TERMINAL
4. Release the locator button, allowing the locator to return to the crimping
position.
5. Close the tool handle until the first ratchet position engages. See
Figure 4.
6. Insert the properly stripped wire through the terminal and against the
wire stop. See Figure 5.
7. Crimp the terminal by squeezing the tool handles until the ratchet
mechanism cycle has been completed. Release the handles to open
the jaws.
TOOLING
PARTIALLY
CLOSED
PARTIALLY
CLOSE HANDLE
OPEN
POSITION
TERMINAL
PRE-STRIPPED
WIRE
WIRE AGAINST
THE WIRE STOP
FIRST RATCHET
POSITION
Figure 4
WIRE STOP IS PART OF
THE LOCATOR
Figure 5
WIRE
TERMINAL
Note: The tamper proof ratchet action will not release the tool until it has been fully closed.
8. Remove the crimped terminal from the terminal locator by pulling on the wire.
9. Visually inspect the crimped terminal for proper crimp location.
Doc No: ATS-638194400 Release Date: 10-31-08
Revision: A
Revision Date: 10-31-08
UNCONTROLLED COPY
Page 3 of 7

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]