TMC22091KHC 데이터 시트보기 (PDF) - Cadeka Microcircuits LLC.
부품명
상세내역
제조사
TMC22091KHC Datasheet PDF : 60 Pages
| |||
TMC22091/TMC22191
PRODUCT SPECIFICATION
Pin Descriptions (continued)
Pin Name
OL4-0
Pin Number
84-Lead 100-Lead
PLCC MQFP
29, 48-51 97, 22-25
BYPASS
28
96
Genlock Interface
GHSYNC
83
64
GVSYNC
82
63
CVBS7-0
44-47, 84, 18-21,
1-3
65-68
Microprocessor Interface
D7-0
14-21 82-89
A1-0
8-9
74-75
Value
TTL
TTL
CMOS
CMOS
TTL
TTL
TTL
Pin Function Description
Overlay Data Inputs (TMC22191 only). 30 of the 256
locations of the CLUT may be reserved for overlay operation.
These CLUT locations are directly accessed by five input pins,
OL4-0. OL4-0 are entered into the TMC22191 on a pixel-by-
pixel basis and select which of the 30 overlay colors is to be
encoded. When all five OL4-0 inputs are LOW, no overlay
occurs.
CLUT Bypass Control (TMC22191 only). When BYPASS is
HIGH, the CLUT is in the pixel data path within the TMC22191.
When BYPASS is LOW, pixel data bypasses the CLUT.
BYPASS is active only for certain modes of the Layering
Control Register (LCR) when the Format Control Register bit 6
is HIGH.
Genlock Horizontal Sync. In Genlock mode, the TMC22x91
will start a new horizontal line (blank-to-sync-edge transition)
with each falling edge of GHSYNC. In non-genlock modes, the
TMC22x91 ignores GHSYNC. The internal pixel clock, PCK, is
aligned with the falling edge of VHSYNC or GHSYNC (Genlock
mode).
Genlock Vertical Sync. In Genlock mode, the TMC22x91 will
start a new vertical sync sequence at line 1 field 1 whenever
GVSYNC and GHSYNC are coincident such that they are
clocked into the TMC22x91 on the same rising edge of PXCK.
If GVSYNC falls at any other time, the TMC22x91 will assume
that this marks the start of field 2, and will ignore it (in odd-field
sync mode) or (in all-field sync mode) respond by generating a
single vertical sync pulse, followed by 2 (PAL) or 2.5 (NTSC)
lines of vertical sync, keyed to the next falling edge on
GHSYNC. See Interface Control Register bit 0 for odd-field and
all-field operation.
Composite Video Inputs. The encoder receives digitized
video, subcarrier phase, and subcarrier frequency over this 8-
bit bus at the PCK rate. This data may be provided by the
companion TMC22071 Genlocking Video Digitizer. In Genlock
mode, the TMC22x91 expects subcarrier phase and frequency
data during each line’s horizontal sync interval, as well as video
data when keying is engaged, transferred at the PCK rate.
Data I/O Port. All control parameters are loaded into and read
back over this 8-bit port. For digital testing, the five lower bits
can also serve as a two-cycle 10-bit data output port. For D/A
converter testing, it can be used as a 10-bit two-cycle input
port, facilitating, for example, ramp-based D/A converter
linearity tests.
µProc Port Controls. As in a RAMDAC, this control governs
whether the microprocessor interface selects a table address
or reads/writes table contents. It also governs setting and
verification of the TMC22x91’s internal operating modes, also
over port D7-0.
8
Share Link: 