75232
LINEAR INTEGRATED CIRCUIT
APPLICATION INFORMATION
Power-Supply protection to meet Power-Off fault conditions of TIA/EIA-232-F
Diodes placed in series with the VDD and VSS leads protect the device in the fault condition in which the
device outputs are shorted to ±15V and the power supplies are at low and provide low-impedance paths to
ground.
VDD
Output
VDD
±15V
UTC 75232
UTC 75232
VSS
VSS
Typical Connection
“*”: Refer Figure 10 to select the correct values for the loading capacitors (C1, C2, and C3), which are required to
meet the RS-232 maximum slew-rate requirement of 30V/μs. The value of the loading capacitors required
depends upon the line length and desired slew rate, but typically is 330 pF.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
7 of 10
QW-R113-005,D