CA0508KPNPO7BB270 데이터 시트보기 (PDF) - YAGEO Corporation

부품명

상세내역

제조사

CA0508KPNPO7BB270

Capacitor Arrays & Networks 15pF 50V NPO 5%

YAGEO Corporation 

Surface-Mount Ceramic Multilayer Capacitors 4C-Array

NP0/X7R/Y5V

Product specification 15

16 V to 50 V

17

TEST

TEST METHOD

Rapid Change IEC 60384- 4.11

of

21/22

Temperature

PROCEDURE

Preconditioning;

150 +0/–10 °C for 1 hour, then keep for

24 ± 1 hours at room temperature

5 cycles with following detail:

30 minutes at lower category temperature

30 minutes at upper category temperature

REQUIREMENTS

No visual damage

Δ C/C Class 1:

NP0: within ± 1% or 1 pF, whichever is greater

Class2:

X5R/X7R: ± 15% Y5V: ± 20%

Recovery time 24 ± 2 hours

D.F. meet initial specified value

Rins meet initial specified value

Damp Heat

with Ur Load

4.13 1. Preconditioning, class 2 only:

No visual damage after recovery

150 +0/-10 °C /1 hour, then keep for

24 ± 1 hour at room temp

∆C/C

2. Initial measure:

Class 1:

Spec: refer initial spec C, D, IR

NP0: within ± 2% or 1 pF, whichever is greater

3. Damp heat test:

Class2:

500 ± 12 hours at 40 ± 2 °C;

90 to 95% R.H. 1.0 Ur applied

4. Recovery:

Class 1: 6 to 24 hours

Class 2: 24 ± 2 hours

5. Final measure: C, D, IR

X5R/X7R: ± 15%; Y5V: ± 30%

D.F.

Class 1: NP0: ≤ 2 x specified value

Class2:

X5R/X7R: ≤ 16V: ≤ 7%

≥ 25V: ≤ 5%

P.S. If the capacitance value is less than the

minimum value permitted, then after the

other measurements have been made the

capacitor shall be precondition according to

“IEC 60384 4.1” and then the requirement

shall be met.

Y5V: ≤ 15%

Rins

Class 1:

NP0: ≥ 2,500 MΩ or Rins x Cr ≥ 25s whichever is less

Class2:

X5R/X7R/Y5V: ≥ 500 MΩ or Rins x Cr ≥ 25s

whichever is less

Nov. 10, 2015 V.4

www.yageo.com

Share Link: