TLP2108 데이터 시트보기 (PDF) - Toshiba

부품명

상세내역

제조사

TLP2108

TOSHIBA PHOTOCOUPLER GaAℓAs Ired & PHOTO-IC

Toshiba 

TLP2108

Precautions Of Surface Mounting Type Photocoupler Soldering & General Storage

(1) Precautions for Soldering

1) When Using Soldering Reflow

z An example of a temperature profile when Sn-Pb eutectic solder is used:

z An example of a temperature profile when lead(Pb)-free solder is used:

z Reflow soldering must be performed once or twice.

z The mounting should be completed with the interval from the first to the last mountings being 2 weeks.

2) When using soldering Flow (Applicable to both eutectic solder and Lead(Pb)-Free solder)

z Apply preheating of 150deg.C for 60 to 120 seconds.

z Mounting condition of 260deg.C or less within 10 seconds is recommended.

z Flow soldering must be performed once

3) When using soldering Iron (Applicable to both eutectic solder and Lead(Pb)-Free solder)

z Complete soldering within 10 seconds for lead temperature not exceeding 260 deg.C or within 3 seconds

not exceeding 350 deg.C.

z Heating by soldering iron must be only once per 1 lead

9

2008-11-26

Share Link: