TJA1054AT/S900 데이터 시트보기 (PDF) - NXP Semiconductors.
부품명
상세내역
제조사
TJA1054AT/S900 Datasheet PDF : 27 Pages
| |||
NXP Semiconductors
TJA1054A
Fault-tolerant CAN transceiver
Table 6. Limiting values …continued
In accordance with the Absolute Maximum Rating System (IEC 60134).[1]
Symbol Parameter
Conditions
Min
VI(WAKE)
input voltage on pin WAKE with respect to any
-
other pin
II(WAKE)
VINH
VRTH
input current on pin WAKE
voltage on pin INH
voltage on pin RTH
with respect to any
other pin
[2] −15
−0.3
−0.3
VRTL
voltage on pin RTL
with respect to any
−0.3
other pin
RRTH
termination resistance on
500
pin RTH
RRTL
termination resistance on
500
pin RTL
Tvj
Tstg
VESD
virtual junction temperature
storage temperature
electrostatic discharge
voltage
human body model
pins RTH, RTL,
CANH and CANL
[3] −40
−55
[4]
−4
all other pins
−2
machine model
[5]
any pin
−150
Max
Unit
VBAT + 0.3 V
-
mA
VBAT + 0.3 V
VBAT + 1.2 V
VBAT + 1.2 V
16 000
Ω
16 000
Ω
+150
°C
+150
°C
+4
kV
+2
kV
+150
V
[1] All voltages are defined with respect to pin GND, unless otherwise specified. Positive current flows into the
device.
[2] Only relevant if VWAKE < VGND − 0.3 V; current will flow into pin GND.
[3] Junction temperature in accordance with “IEC 60747-1”. An alternative definition is: Tvj = Tamb + P × Rth(vj-a)
where Rth(vj-a) is a fixed value to be used for the calculation of Tvj. The rating for Tvj limits the allowable
combinations of power dissipation (P) and ambient temperature (Tamb).
[4] Equivalent to discharging a 100 pF capacitor through a 1.5 kΩ resistor.
[5] Equivalent to discharging a 200 pF capacitor through a 10 Ω resistor and a 0.75 µH coil.
9. Thermal characteristics
Table 7.
Symbol
Rth(j-a)
Rth(j-s)
Thermal characteristics
Parameter
thermal resistance from junction
to ambient
thermal resistance from junction
to substrate bare die
Conditions
in free air
in free air
Typ
Unit
120
K/W
40
K/W
TJA1054A_5
Product data sheet
Rev. 05 — 29 September 2009
© NXP B.V. 2009. All rights reserved.
10 of 27
Share Link: 