TJA1040 데이터 시트보기 (PDF) - Philips Electronics
부품명
상세내역
제조사
TJA1040 Datasheet PDF : 22 Pages
| |||
Philips Semiconductors
High speed CAN transceiver
Product specification
TJA1040
FEATURES
• Fully compatible with the ISO 11898 standard
• High speed (up to 1 MBaud)
• Very low-current standby mode with remote wake-up
capability via the bus
• Very low ElectroMagnetic Emission (EME)
• Differential receiver with high common-mode range for
ElectroMagnetic Immunity (EMI)
• Transceiver in unpowered state disengages from the
bus (zero load)
• Input levels compatible with 3.3 V and 5 V devices
• Voltage source for stabilizing the recessive bus level if
split termination is used (further improvement of EME)
• At least 110 nodes can be connected
• Transmit Data (TXD) dominant time-out function
• Bus pins protected against transients in automotive
environments
• Bus pins and pin SPLIT short-circuit proof to battery and
ground
• Thermally protected.
GENERAL DESCRIPTION
The TJA1040 is the interface between the Controller Area
Network (CAN) protocol controller and the physical bus.
It is primarily intended for high speed applications, up to
1 MBaud, in passenger cars. The device provides
differential transmit capability to the bus and differential
receive capability to the CAN controller.
The TJA1040 is the next step up from the TJA1050 high
speed CAN transceiver. Being pin compatible and offering
the same excellent EMC performance, the TJA1040 also
features:
• An ideal passive behaviour when supply voltage is off
• A very low-current standby mode with remote wake-up
capability via the bus.
This makes the TJA1040 an excellent choice in nodes
which can be in power-down or standby mode in partially
powered networks.
QUICK REFERENCE DATA
SYMBOL
PARAMETER
CONDITIONS
VCC
ICC
VCANH
VCANL
VSPLIT
Vesd
supply voltage
supply current
DC voltage on pin CANH
DC voltage on pin CANL
DC voltage on pin SPLIT
electrostatic discharge voltage
operating range
standby mode
0 < VCC < 5.25 V; no time limit
0 < VCC < 5.25 V; no time limit
0 < VCC < 5.25 V; no time limit
Human Body Model (HBM)
pins CANH, CANL and SPLIT
all other pins
tPD(TXD-RXD) propagation delay TXD to RXD VSTB = 0 V
Tvj
virtual junction temperature
MIN.
4.75
5
−27
−27
−27
MAX.
5.25
15
+40
+40
+40
UNIT
V
µA
V
V
V
−6
+6
kV
−4
+4
kV
40
255 ns
−40 +150 °C
ORDERING INFORMATION
TYPE
NUMBER
TJA1040T
TJA1040U
NAME
SO8
−
PACKAGE
DESCRIPTION
plastic small outline package; 8 leads; body width 3.9 mm
bare die; die dimensions 1840 × 1440 × 380 µm
VERSION
SOT96-1
−
2003 Oct 14
2
Share Link: 