TUA 6010XS
preliminary
Functional Description
is released to allow the processor to generate a stop condition. The status word
consists of two bits from the TTL input ports, three bits from the A/D converter,
the lock flag and the power-on flag.
Four different chip addresses can be set by appropriate connection of pin CAS
(see table 2 ”address selection”).
When the supply voltage is applied, a power-on reset circuit prevents the PLL
from setting the SDA line to LOW, which would block the bus. The power-on
reset flag POR is set at power-on and when VVCCD goes below 3.2 V. It will be
reset at the end of a READ operation.
Wireless Components
3 - 10
Specification, August 1999