LS037V7DW01 데이터 시트보기 (PDF) - Sharp Electronics

부품명

상세내역

제조사

LS037V7DW01

TFT-LCD Module

Sharp Electronics 

LCP-06008A-16

(13)Design guidance for touchpanel(T/P)

(1) If an consumer will put a palm on housing in normal usage, care should be taken as follows.

(2) Keep the gap, for example 0.3 to 0.7mm,between bezel edge and T/P surface.

The reason is to avoid the bezel edge from contacting T/P surface that may cause a “short”

with bottom layer(See Fig.2)

(3) Insertion a cushion material is recommended.

(4) The cushion material should be limited just on the busbar insulation paste area.

If it is over the transparent insulation paste area, a ”short” may be occurred.

(5) There is one where a resistance film is left in the T/P part of the end of the pole.

Design to keep insulation from the perimeter to prevent from mis-operation and so on.

Housing

Cushion material

PET Film

Insulation metal

Transparent

Insulation Paste

Glass

Key Area

Prohibition Area

Fig.2

0.3

～0.7mm

Electrode

Layer

Share Link: