IDT72V3673(2016) 데이터 시트보기 (PDF) - Integrated Device Technology
부품명
상세내역
제조사
IDT72V3673 Datasheet PDF : 30 Pages
| |||
IDT72V3653/72V3663/72V3673 3.3V CMOS SyncFIFOTM WITH
BUS-MATCHING 2,048 x 36, 4,096 x 36, and 8,192 x 36
COMMERCIAL TEMPERATURE RANGE
ABSOLUTE MAXIMUM RATINGS OVER OPERATING FREE-AIR
TEMPERATURE RANGE (Unless otherwise noted)(1)
Symbol
Rating
Commercial
Unit
VCC
Supply Voltage Range
–0.5 to +4.6
V
VI(2)
Input Voltage Range
–0.5 to VCC+0.5
V
VO(2)
Output Voltage Range
–0.5 to VCC+0.5
V
IIK
Input Clamp Current (VI < 0 or VI > VCC)
±20
mA
IOK
Output Clamp Current (VO = < 0 or VO > VCC)
±50
mA
IOUT
Continuous Output Current (VO = 0 to VCC)
±50
mA
ICC
Continuous Current Through VCC or GND
±400
mA
TSTG
Storage Temperature Range
–65 to 150
°C
NOTES:
1. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these
or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect
device reliability.
2. The input and output voltage ratings may be exceeded provided the input and output current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min. Typ. Max. Unit
VCC(1) Supply Voltage for 10ns
3.15 3.3 3.45
V
VCC Supply Voltage for 15ns
3.0 3.3 3.6
V
VIH High-Level Input Voltage
2 — VCC+0.5 V
VIL Low-Level Input Voltage
——
0.8
V
IOH High-Level Output Current
——
–4
mA
IOL Low-Level Output Current
——
8
mA
TA OperatingTemperature
0—
70
°C
NOTES:
1. For 10ns speed grade: Vcc = 3.3V ± 0.15V, JEDEC JESD8-A compliant
ELECTRICAL CHARACTERISTICS OVER RECOMMENDED OPERATING
FREE-AIR TEMPERATURE RANGE (Unless otherwise noted)
Symbol
Parameter
VOH Output Logic "1" Voltage
Test Conditions
VCC = 3.0V,
IOH = –4 mA
IDT72V3653
IDT72V3663
IDT72V3673
Commercial
tCLK = 10, 15ns(3)
Min. Typ. Max. Unit
2.4
—
—
V
VOL Output Logic "0" Voltage
VCC = 3.0V,
IOL = 8 mA
—
—
0.5
V
ILI
ILO
ICC3(2)
Input Leakage Current (Any Input)
Output Leakage Current
Standby Current (No Clocks running)
VCC = 3.6V,
VCC = 3.6V,
VCC = 3.6V,
VI = VCC or 0
VO = VCC or 0
VI = VCC - 0.2V or 0
—
—
10
μA
—
—
10
μA
—
—
1
mA
ICC2(2) Standby Current (With CLKA & CLKB running) VCC = 3.6V,
VI = VCC - 0.2V or 0
—
—
5
mA
CIN(4) InputCapacitance
VI = 0,
f = 1 MHz
—
4
—
pF
COUT(4) OutputCapacitance
VO = 0,
f = 1 MHZ
NOTES:
1. All typical values are at VCC = 3.3V, TA = 25°C.
2. For additional ICC information, see Figure 1, Typical Characteristics: Supply Current (ICC) vs. Clock Frequency (fS).
3. Commercial-10ns speed grade only: Vcc = 3.3V ± 0.15V, TA = 0° to +70°; JEDEC JESD8-A compliant
4. Characterized values, not currently tested.
—
8
—
pF
6
Share Link: 