ADG701BRJ-500RL7 데이터 시트보기 (PDF) - Analog Devices

부품명

상세내역

제조사

ADG701BRJ-500RL7

CMOS Low Voltage 2 Ω SPST Switch

Analog Devices 

ABSOLUTE MAXIMUM RATINGS

TA = +25°C, unless otherwise noted.

Table 4.

Parameter

VDD to GND

Analog and Digital Inputs1

Continuous Current, S or D

Peak Current, S or D

Operating Temperature Range

Industrial (B Version)

Storage Temperature Range

Junction Temperature

MSOP Package, Power Dissipation

θJA Thermal Impedance

θJC Thermal Impedance

SOT-23 Package, Power Dissipation

θJA Thermal Impedance

θJC Thermal Impedance

Lead Temperature, Soldering

Vapor Phase (60 sec)

Infrared (15 sec)

Pb-free Reflow Soldering

Peak Temperature

Time at Peak Temperature

ESD

Rating

−0.3 V to +7 V

−0.3 V to VDD + 0.3 V

or 30 mA, whichever

occurs first

30 mA

100 mA, pulsed at 1 ms,

10% duty cycle maximum

−40°C to +85°C

−65°C to +150°C

150°C

315 mW

206°C/W

44°C/W

282 mW

229.6°C/W

91.99°C/W

215°C

220°C

260(+0/−5)°C

10 sec to 40 sec

2 kV

1 Overvoltages at IN, S, or D are clamped by internal diodes. Current should be

limited to the maximum ratings given.

ADG701/ADG702

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

Only one absolute maximum rating may be applied at any

one time.

Table 5. Truth Table

ADG701 In

ADG702 In

0

1

1

0

Switch Condition

Off

On

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

Rev. C | Page 5 of 12

Share Link: