DF14A-7P-1.25H 데이터 시트보기 (PDF) - HIROSE ELECTRIC

부품명

상세내역

제조사

DF14A-7P-1.25H

1.25mm Pitch Super Low profile Crimping Connector

HIROSE ELECTRIC 

BPrecautions

1. Recommended Temperature Profile (SMT)

2. Recommended Manual Soldering Condition (SMT)

3. Recommended Screen Thickness (SMT)

4. Board Sled (SMT)

5. Cleaning Condition

6. Connection Condition

7. Cautions

Note 1.The soldering process is allowed up to twice under the same condition. However, the

interval between the first and second processes must be maintained at the room

temperature.

Note 1.The temperature indicates the board surface temperature on the connector lead area.

Manual soldering: 290ç for 2 seconds

0.15 to 0.2mm

Max 0.03mm at the connector center area, based on both connector edges

Refer to Nylon Connector Use Hand book.

Refer to Nylon Connector Use Hand book.

sBe careful to carry out the crimping operation according to the "Crimping Condition Sheet"

and "Crimping Quality Reference", because the crimping contact style is too small.

sBe careful for an excessive scoop insertion/extraction, which will cause damage to the

product.

B182

Share Link: