B41145A4477M000 데이터 시트보기 (PDF) - EPCOS AG

부품명

상세내역

제조사

B41145A4477M000

Aluminum electrolytic capacitors SMD capacitors

EPCOS AG 

B41145

Low impedance series  105 °C

11 Do not apply excessive force to the leads and terminals. Do not move the capacitor after

soldering it onto the PC board and do not carry the PC board by gripping the capacitor.

Observe the following rules to prevent undue stress to the capacitor:

a Do not tilt or bend the capacitor after soldering.

b Ensure that the terminal spacing matches the corresponding hole spacing on the PC board.

12 The aluminum case is not insulated from the cathode. Do not place a conductor under the

aluminum capacitors on the PC board as this may cause a short circuit. The case and top of

capacitors used in switched mode power supplies have a high-voltage-resistant heat shrink

sleeve to ensure safe usage.

13 The leads of capacitors with a case diameter exceeding 14 mm cannot be used for fixing.

Please read Cautions and warnings and

Important notes at the end of this document.

Page 13 of 14

Share Link: