Features
AH289
HIGH VOLTAGE HALL-EFFECT SMART FAN MOTOR
CONTROLLER
General Description
• On Chip Hall Sensor
• Rotor-Locked Shutdown
• Automatically Restart
• Rotor-State Detection (RD) Output
• Built-in Zener Protection for Output Driver
• Operating Voltage: 3.8V~28V
• Output Current: IO (AVE) = 400mA
• Lead Free Finish/RoHS Compliant for Lead Free
products (Note 1)
• Lead Free Packages: SIP-5L and SOT89-5L
AH289 is a monolithic fan motor controller with Hall sensor’s
capability. It contains two complementary open-drain transistors
for motors coil driving, an automatic lock current shutdown, and
recovery protection. In addition, the Rotor-State Detection (RD)
output is for Rotor-State Detection.
Rotor-lock shutdown detection circuit turns off the output driver
when the rotor is blocked to avoid coil overheat. Then, the
automatic recovery circuit will restart the motor. These protected
actions are repeated and periodic during the blocked period. Until
the blocking is removed, the motor recovers and runs normally.
Ordering Information
AH289 - X X X
Package
P: SIP-5L
Y: SOT89-5L
Lead
L : Lead Free
Packing
-B : Bulk
-13 : Taping
Note: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Device
Package
Code
Packaging
AH289-P
P
Lead-free
AH289-Y
Y
Lead-free
SIP-5
SOT89-5
Tube/Bulk
Quantity
Part Number
Suffix
1000
-B
NA
NA
7” Tape and Reel
Quantity
Part Number
Suffix
NA
NA
2500/Tape & Reel
-13
Note: 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
Pin Assignment
289
( Front View )
1 : RD
2 : VCC
3 : DO
4 : DOB
5 : GND
123 45
SIP-5L
VCC 1
5 RD
GN 2 289
D
DO 3
74 DOB
SOT89-5L
AH289 Rev. 3
1 of 9
www.diodes.com
JANUARY 2007
© Diodes Incorporated