datasheetbank_Logo
전자부품 반도체 검색엔진( 무료 PDF 다운로드 ) - 데이터시트뱅크

L5986ATR 데이터 시트보기 (PDF) - STMicroelectronics

부품명
상세내역
제조사
L5986ATR
ST-Microelectronics
STMicroelectronics 
L5986ATR Datasheet PDF : 39 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
L5986 - L5986A
1
Pin settings
1.1
Pin connection
Figure 1. Pin connection (top view)
OUT
SYNCH
INH
COMP
Pin settings
VCC
GND
FSW
FB
1.2
Pin description
Table 1.
N.
1
2
3
4
5
6
7
8
Pin description
Type
Description
OUT
SYNCH
INH
COMP
FB
FSW
Regulator output
Master/slave synchronization. When it is left floating, a signal with a
phase shift of half a period respect to the power turn on is present at the
pin. When connected to an external signal at a frequency higher than the
internal one, then the device is synchronized by the external signal, with
zero phase shift.
Connecting together the SYNCH pin of two devices, the one with higher
frequency works as master and the other one as slave; so the two
powers turn on have a phase shift of half a period.
A logical signal (active high) disable the device. With INH higher than
1.9 V the device is OFF and with INH lower than 0.6 V the device is ON.
Error amplifier output to be used for loop frequency compensation
Feedback input. Connecting the output voltage directly to this pin the
output voltage is regulated at 0.6 V. To have higher regulated voltages an
external resistor divider is required from Vout to FB pin.
The switching frequency can be increased connecting an external
resistor from FSW pin and ground. If this pin is left floating the device
works at its free-running frequency of 250 kHz.
GND
VCC
Ground
Unregulated DC input voltage
3/39

Share Link: 

datasheetbank.com [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]