MC-45V16AD641 데이터 시트보기 (PDF) - NEC => Renesas Technology

부품명

상세내역

제조사

MC-45V16AD641

16M-WORD BY 64-BIT VirtualChannel™ SYNCHRONOUS DYNAMIC RAM MODULE UNBUFFERED TYPE

NEC => Renesas Technology 

MC-45V16AD641

DC Characteristics (Recommended Operating Conditions Unless Otherwise Noted)

Parameter

Symbol

Test condition

Grade MIN. MAX. Unit Notes

5 Operating current (Prefetch

mode at one bank active)

5 Operating current (Restore

ICC1P

ICC1R

tRC ≥ tRC (MIN.)

Prefetch is executed one time during tRC.

tRC ≥ tRC (MIN.)

-A75

-A10

-A75

880 mA 1

840

880 mA 1

mode at one bank active)

-A10

840

Precharge standby current

in power down mode

Precharge standby current

in non power down mode

ICC2P

ICC2PS

ICC2N

ICC2NS

CKE ≤ VIL (MAX.), tCK = 15 ns

CKE ≤ VIL (MAX.), tCK = ∞

CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.),

Input signals are changed one time during 30 ns.

CKE ≥ VIH (MIN.), tCK = ∞ , Input signals are stable.

16 mA

8

400 mA

128

Active standby current in

power down mode

Active standby current in

non power down mode

ICC3P

ICC3PS

ICC3N

CKE ≤ VIL (MAX.), tCK = 15 ns

CKE ≤ VIL (MAX.), tCK = ∞

CKE ≥ VIH (MIN.), tCK = 15 ns, /CS ≥ VIH (MIN.),

Input signals are changed one time during 30 ns.

80 mA

64

400 mA

5 Operating current

ICC3NS

ICC4

CKE ≥ VIH (MIN.), tCK = ∞, Input signals are stable.

tCK ≥ tCK (MIN.), IO = 0 mA

-A75

160

720 mA 2

(Burst mode)

5 Auto refresh current

Background : precharge standby

ICC5

tRC ≥ tRC (MIN.)

-A10

-A75

600

1,280 mA 3

5 Self refresh current

ICC6 CKE ≤ 0.2 V

-A10

-A75

1,120

16 mA

-A10

16

Input leakage current

II (L) VI = 0 to 3.6 V, All other pins not under test = 0 V

Input leakage current (CKE1)

Output leakage current

IO (L) DOUT is disabled, VO = 0 to 3.6 V

–16 +16 µA

–500 +500 µA

–1.5 +1.5 µA

High level output voltage

VOH IO = – 4.0 mA

2.4

V

Low level output voltage

VOL IO = + 4.0 mA

0.4 V

Notes 1. ICC1 depends on output loading and cycle rates. Specified values are obtained with the output open. In

addition to this, ICC1 is measured on condition that addresses are changed only one time during tCK (MIN.).

2. ICC4 depends on output loading and cycle rates. Specified values are obtained with the output open. In

addition to this, ICC4 is measured on condition that addresses are changed only one time during tCK (MIN.).

3. ICC5 is measured on condition that addresses are changed only one time during tCK (MIN.).

6

Data Sheet M13823EJ6V0DS00

Share Link: