
Analog Devices
GENERAL DESCRIPTION
The SSM2529 is a digital input, Class-D power amplifier that combines a digital-to-analog converter (DAC), a low power audio specific digital signal processor, and a sigma-delta (Σ-Δ) Class-D modulator.
This unique architecture enables extremely low real-world power consumption from digital audio sources with excellent audio performance. The SSM2529 is ideal for power sensitive applications, such as mobile phones and portable media players, where system noise can the corrupt small analog signals that are sent to an analog input audio amplifier.
FEATURES
Filterless mono, digital input Class-D amplifier
I2C control interface
Serial digital audio interface supports common formats
(I2S, PCM, LJ, RJ, TDM1-16, PDM)
Supports wide range of sample rates: 8.0 kHz to 96.0 kHz
MCLK and BCLK can be provided by built-in phase-locked
loop (PLL)
Supports single power supply mode; DVDD can be provided
by built-in low dropout (LDO) regulator
2.5 V to 5.5 V SPKVDD operating supply voltage
1.08 V to 1.98 V DVDD operating supply voltage
Support off-chip volume control without I2C
2.4 W into 4 Ω and 1.4 W into 8 Ω at 5 V supply with <1% THD + N
Available in a 16-ball, 1.92 mm × 1.94 mm, 0.4 mm pitch WLCSP
Efficiency 95% at full scale into 8 Ω
Signal-to-noise ratio (SNR): 103 dB, A-weighted
Power supply rejection ratio (PSRR): >80 dB at 217 Hz
Digital volume control: −70 dB to +24 dB in 0.375 dB steps
Ultralow idle current
Autosample rate detection
Pop-and-click suppression
Short-circuit and thermal protection with programmable
autorecovery
Supports smart power-down when no input signal is detected
Power-on reset and UVLO voltage monitoring
Selectable ultralow EMI emission mode
Supports SPKVDD voltage monitor
Digital audio processing
7-band programmable equalizer
Programmable dynamic range compression (DRC) with
noise gate, expander, compressor, and limiter
APPLICATIONS
Mobile phones
Portable media players
Laptop PCs
Wireless speakers
Portable gaming
Navigation systems