GENERAL DESCRIPTION
The MX29F004T/B is a 4-mega bit Flash memory organized as 512K bytes of 8 bits. MXICs Flash memories offer the most cost-effective and reliable read/write nonvolatile random access memory. The MX29F004T/B is packaged in 32-pin PLCC, TSOP, PDIP. It is designed to be reprogrammed and erased in system or in standard EPROM programmers.

FEATURES
• 524,288 x 8 only
• Single power supply operation
    - 5.0V only operation for read, erase and program operation
• Fast access time: 70/90/120ns
• Low power consumption
    - 30mA maximum active current (5MHz)
    - 1uA typical standby current
• Command register architecture
    - Byte Programming (7us typical)
    - Sector Erase (Sector structure:16KB/8KB/8KB/32KB and 64KBx7)
• Auto Erase (chip & sector) and Auto Program
    - Automatically erase any combination of sectors with Erase Suspend capability.
    - Automatically program and verify data at specified address
• Erase suspend/Erase Resume
    - Suspends an erase operation to read data from, or program data to, another sector that is not being erased, then resumes the erase.
• Status Reply
    - Data polling & Toggle bit for detection of program and erase cycle completion.
• Chip protect/unprotect for 5V only system or 5V/12V system.
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1V to VCC+1V
• Low VCC write inhibit is equal to or less than 3.2V
• Package type:
    - 32-pin PLCC, TSOP or PDIP
• Compatibility with JEDEC standard
    - Pinout and software compatible with single-power supply Flash
• 20 years data retention