Description
The LED6001 device is a LED driver that combines a boost controller and a high-side current sensing circuitry optimized for driving one string of high-brightness LEDs. The device is compatible with multiple topologies such as boost, SEPIC and floating load buck-boost. The brightness of the LEDs can be controlled through PWM dimming and analog dimming (10:1 ratio) by means of two independent pins. Enhanced PWM dimming can be obtained thanks to a MOSFET in series with the LED string and directly driven by a dedicated pin.

FEATUREs
• Switching controller section
   – 5.5 V to 36 V input voltage range
   – Very low shutdown current: ISHDN < 10 µA
   – Internal +5 V LDO for gate driver supply
   – Internal +3.3 V LDO for device supply
   – Fixed frequency peak current mode control
   – Adjustable (100 kHz to 1 MHz) switching
      frequency
   – External synchronization for multi-device
      applications
   – High performance external MOSFET driver
   – Cycle-by-cycle external MOSFET OCP
   – Fixed internal soft-start
   – Programmable output OVP
   – Boost, buck-boost and SEPIC topologies
      supported
   – Thermal shutdown with autorestart
   – Output short-circuit detection
• LED control section
   – Up to 60 V output voltage
   – Constant current control loop
   – High-side output current sensing circuitry
   – 30 to 300 mV differential sensing voltage
   – ± 4% output current reference accuracy
   – Output overcurrent protection
   – Sensing resistor failure protection
   – PWM dimming with auxiliary series switch
   – Analog dimming

APPLICATIONs
• Indoor and architectural LED lighting
• Emergency LED lighting
• Off-grid LED street lighting
• White goods
• Gaming/gambling machines