General description
The KMZ80 is a single channel magnetic angle sensor. Magnetoresistive (MR) sensor bridges and mixed signal IC are integrated into a single package. The KMZ80 in SO8 package is intended for printed-circuit boards (PCBs) where external filter components are required. The IC allows user-specific adjustments of angular range, zero angle, and clamping voltages. The settings are stored permanently in a non-volatile memory (NVM). The programmable angle sensor is pre-programmed, pre-calibrated and therefore, ready to use.

FEATUREs and benefits
• High precision sensor for magnetic angular
   measurement
• Single package sensor
• Automotive qualified in accordance with
   AEC-Q100 Rev-H
• Programmable user adjustments, e.g. zero
   angle and angular range
• Fail-safe non-volatile memory with write
   protection using lock bit
• Independent from magnetic field strength
   above 25 kA/m
• Factory calibrated
• Separate temperature sensor and auxiliary
   analog-to-digital converter (ADC) for magnetic
   field conversion check
• High temperature range up to 150 °C
• Ratiometric analog output voltage or push pull
   output stage compliant with SAE J2716 SENT
   using pulse shaping
• Overvoltage protection up to 18 V
• Power-loss detection
• Programming via one-wire interface (OWI)
• 8 × 12-bit original equipment manufacturer
   (OEM) code registers for identification (ID)
• ISO 26262 ASIL-C capable, safety element
   out of context (SEooC)
• Multipoint calibration (MPC) with
   17 equidistant or seven free selectable
   calibration points
• Low latency