[B.C.E. ELECTRONICS]

Floating Connector
When the connector is mounted on the printed circuit board, a location error in the two directions of horizontal and vertical(XY direction) may occur at both connectors. In addition, if each printed circuit board is fixed to a case by screws after mating connectors, the connectors may have to compensate for the location error because a gap occurs during screwing to the printed circuit board. A connector having a tolerance to compensate for such an error or gap caused by vibration is called a floating connector. The DY series is a 0.5mm(0.020) fine pitch connector with ±0.5mm(0.020) floating mechanism and ensures sufficient compensation for location errors.

FEATURES
▶ Location error offsets ±0.5mm in the XY direction.
▶ High reliable design with effective mating length of 1.25mm(0.049’’).
▶ Suction area for automated mounting provided.
▶ Positioning posts are optional for manual mounting.
▶ Wide variations of contacts (30, 40, 50, 60, 80, 100, 120 and
   140 pins) are available.
   *Available pin count varies with the product type.
▶ Vertical and Stacked mating combinations.
▶ Stacked mating heights of 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm.
   (0.197, 0236, 0.276, 0.315, 0.354, 0.394, 0.433, 0.472, 0.512 and 0.551”)
   *Available mating height varies with the product type.
▶ Shape of retention clip forming the large fillet.
   *Optional type with a dust cap provided on a plug side is also available.