74ALVC16834ADGG データシート - NXP Semiconductors.
メーカー

NXP Semiconductors.
General description
The 74ALVC16834A is an 18-bit registered driver.
Features and benefits
• Wide supply voltage range from 1.2 V to 3.6 V
• CMOS low-power consumption
• Direct interface with TTL levels (2.7 V to 3.6 V)
• Current drive ± 24 mA at VCC = 3.0 V
• MULTIBYTE flow-through standard pin-out architecture
• Low inductance multiple VCC and GND pins
for minimum noise and ground bounce
• Output drive capability 50 Ω transmission lines at 85°C
• Input diodes to accommodate strong drivers
• Complies with JEDEC standards:
– JESD8-5 (2.3 V to 2.7 V)
– JESD8B/JESD36 (2.7 V to 3.6 V)
• ESD protection:
– HBM ANSI/ESDA/JEDEC JS-001 exceeds 2000 V
– CDM JESD22-C101E exceeds 1000 V
Page Link's:
1
2
3
4
5
6
7
8
9
10
More Pages
18-bit registered driver with inverted register enable (3-State)
Philips Electronics
18-bit registered driver with inverted register enable (3-State)
Philips Electronics
20-bit registered driver with inverted register enable (3-State)
NXP Semiconductors.
20-bit registered driver with inverted register enable (3-State)
Philips Electronics
20-bit registered driver with inverted register enable (3-State)
Philips Electronics
18-bit registered driver with inverted register enable and 30Ω termination resistors (3-State)
Philips Electronics
18-bit registered driver with inverted register enable and 30 Ω termination resistors; 3-state
NXP Semiconductors.
18-bit registered driver with inverted register enable and 15 Ω termination resistors (3-State)
Philips Electronics
18-bit registered driver with inverted register enable and Dynamic Controlled Outputs™ (3-State)
Philips Electronics
16-bit registered driver with inverted register enable and 30Ω termination resistors (3-State)
Philips Electronics