MPC5607B(2010) データシートの表示（PDF） - Freescale Semiconductor

部品番号

コンポーネント説明

メーカー

MPC5607B
(Rev.:2010)

MPC5607B Microcontroller Data Sheet

Freescale Semiconductor 

General description

Table 2 summarizes the functions of the blocks present on the MPC5607B.

Table 2. MPC5607B series block summary

Block

Function

Analog-to-digital converter (ADC) Converts analog voltages to digital values

Boot assist module (BAM)

Clock generation module

(MC_CGM)

Crossbar switch (XBAR)

A block of read-only memory containing VLE code which is executed according

to the boot mode of the device

Provides logic and control required for the generation of system and peripheral

clocks

Supports simultaneous connections between two master ports and three slave

ports. The crossbar supports a 32-bit address bus width and a 64-bit data bus

width.

Cross triggering unit (CTU)

Enables synchronization of ADC conversions with a timer event from the eMIOS

or from the PIT

Deserial serial peripheral interface Provides a synchronous serial interface for communication with external devices

(DSPI)

Enhanced modular input output Provides the functionality to generate or measure events

system (eMIOS)

Flash memory

Provides non-volatile storage for program code, constants and variables

FlexCAN (controller area network) Supports the standard CAN communications protocol

Frequency-modulated

phase-locked loop (FMPLL)

Generates high-speed system clocks and supports programmable frequency

modulation

Internal multiplexer (IMUX) SIU Allows flexible mapping of peripheral interface on the different pins of the device

subblock

Inter-integrated circuit (I2C™) bus A two wire bidirectional serial bus that provides a simple and efficient method of

data exchange between devices

Interrupt controller (INTC)

JTAG controller

Provides priority-based preemptive scheduling of interrupt requests

Provides the means to test chip functionality and connectivity while remaining

transparent to system logic when not in test mode

LINFlex controller

Memory protection unit (MPU)

Periodic interrupt timer (PIT)

Real-time counter (RTC)

Manages a high number of LIN (Local Interconnect Network protocol) messages

efficiently with a minimum of CPU load

Provides hardware access control for all memory references generated in a

device

Produces periodic interrupts and triggers

A free running counter used for time keeping applications, the RTC can be

configured to generate an interrupt at a predefined interval independent of the

mode of operation (run mode or low-power mode)

MPC5607B Microcontroller Data Sheet, Rev. 3

6

Freescale Semiconductor

Preliminary—Subject to Change Without Notice

Share Link: