MK2703 データシートの表示（PDF） - Integrated Device Technology
部品番号
コンポーネント説明
メーカー
MK2703 Datasheet PDF : 7 Pages
| |||
MK2703
PLL AUDIO CLOCK SYNTHESIZER
CLOCK SYNTHESIZER
stray capacitance of the board to match the nominally
required crystal load capacitance. Because load
capacitance can only be increased in this trimming process,
it is important to keep stray capacitance to a minimum by
using very short PCB traces (and no vias) between the
crystal and device. Crystal capacitors, if needed, must be
connected from each of the pins X1 and X2 to ground.
The value (in pF) of these crystal caps should equal (CL -16
pF)*2. In this equation, CL= crystal load capacitance in pF.
Example: For a crystal with an 18 pF load capacitance, each
crystal capacitor would be 4 pF [(18-16) x 2] = 4.
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the MK2703. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these
or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
Item
Supply Voltage, VDD
All Inputs and Outputs
Ambient Operating Temperature, MK2703S (commercial)
Ambient Operating Temperature, MK2703SI (industrial)
Storage Temperature
Soldering Temperature
Rating
-0.5 V to 7 V
-0.5 V to VDD+0.5 V
0 to +70° C
-40 to +85° C
-65 to +150° C
260° C
Recommended Operation Conditions
Parameter
Ambient Operating Temperature
Power Supply Voltage (measured in respect to GND)
Min.
-40
+3.13
Typ.
Max.
+85
+5.50
Units
°C
V
DC Electrical Characteristics
VDD=3.3 V ±5% , Ambient temperature -40 to +85° C, unless stated otherwise
Parameter
Symbol Conditions Min. Typ. Max. Units
Operating Voltage
VDD
3.13
5.50
V
Input High Voltage
VIH X1 pin only
(VDD/2)+1 VDD/2
V
Note 1
Input Low Voltage
VIL X1 pin only
Note 1
VDD/2 (VDD/2)-1 V
Input High Voltage
Input Low Voltage
Output High Voltage
VIH S0, S1 pins
2.0
VIL S0, S1 pins
VOH IOH = -12 mA
2.4
V
0.8
V
V
IDT™ PLL AUDIO CLOCK SYNTHESIZER
3
MK2703
REV J 122109
Share Link: 