MKP1848C571050KY2 データシートの表示（PDF） - Vishay Semiconductors
部品番号
コンポーネント説明
メーカー
MKP1848C571050KY2 Datasheet PDF : 20 Pages
| |||
www.vishay.com
MKP1848C DC-Link
Vishay Roederstein
CONSTRUCTION DESCRIPTION
Low inductive wound cell elements of metallized polypropylene film. The capacitors have non segmented film except in the
cases with dimensions 70 mm x 65 mm x 57.5 mm and 130 mm x 65 mm x 57.5 mm, wherein the film is segmented. Potted
with resin in a flame retardant case.
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK
The capacitor unit is designed for mounting on a printed circuit board.
In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed
circuit board.
The capacitors shall be mechanically fixed by the leads and the body clamped.
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD
For product height with seating plane as given by “IEC 60717” as reference.
For 2 pins:
The maximum space for length (lmax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit
board is shown in the drawings.
• For products with 15 mm < pitch 27.5 mm w = l = 0.5 mm and h = 0.1 mm
• For products with pitch = 37.5 mm, w = l = 0.7 mm and h = 0.5 mm
• For products with pitch = 52.5 mm, w = l = 1.0 mm and h = 0.5 mm
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product
concerned.
The maximum length and width of film capacitors is shown in the figure:
Eccentricity
For 4 pins, 6 pins, and 12 pins:
DIMENSIONS in millimeters
wmax. = w + Δw
Imax. = I + ΔI
hmax. = h + Δh
Seating plane
Wmax.
P2
2 x P2 ± 0.5 mm
3 x P2 ± 0.5 mm
4 x P2 ± 0.5 mm
P1
5 x P2 ± 0.5 mm
Lmax.
ØD
P1
Lmax.
Wmax.
ØD
H
37.5
I + 1.5
w + 1.8
1.5
h + 0.5
52.5
I + 1.8
w + 2.0
1.7
h + 0.5
Revision: 31-Oct-2018
12
Document Number: 26015
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 