1. Features
• MPEGI/II-Layer 3 Hardwired Decoder
– Stand-alone MP3 decoder
– 48, 44.1, 32, 24, 22.05, 16 KHz sampling freq.
– Separated digital volume control on left and right channels (software control using
31 steps)
– Bass, medium, and Treble Control (31 steps)
– Bass Boost sound effect.
– Ancillary data extraction
– “CRC Error” and “MPEG Frame Synchronization” indicators
• Programmable Audio Output for interfacing with common audio DAC available on the
market
– PCM format compatible
– I2S format compatible
• 8-bit MCU C51 core based (FMAX= 20 MHz)
• 2304 bytes of Internal RAM
• 64 Kbytes of Code Memory
– FLASH: T89C51SND1, ROM: T83C51SND1
• 4 Kbytes of Boot Flash Memory (T89C51SND1)
– ISP: download from USB or UART to any external memory cards
• USB Rev 1.1 controller
– “Full speed” data transmission
• Built-in PLL
– MP3 Audio clocks
– USB clock
• MultiMediaCard Interface Compatibility
• Atmel DataFlash SPI Interface Compatibility
• IDE/ATAPI Interface
• 2 Channels 10-bit ADC, 8KHz (8 true bit)
– Battery voltage Monitoring
– Voice recording controlled by software
• Up to 44 bits of General Purpose I/Os for:
– 4-bit interrupt keyboard port for a 4 x n matrix
– Smartmedia software interface
• Standard Two 16-bit Timers/Counters
• Hardware Watchdog Timer
• Standard Full Duplex UART with Baud Rate Generator
• 2-wire Master and Slave Modes Controller
• SPI Master and Slave Modes Controller
• Power Management
– Power-On reset
– Software programmable MCU clock
– Idle mode, Power-Down mode
• Operating conditions:
– 3V, ±10%, 25 mA typical operating at 25°C
– -40°C to +85°C
• Packages
– TQFP80, PLCC84 (development board)
– Dice
Single Chip
Microcontroller
with MP3
Decoder and
Man Machine
Interface
T8xC51SND1
Rev. D – 15-Nov-01
1