®
®
INNOVATION and EXCELLENCE
Dual Output
BMP Models
5V and 3.3V, 2" x 3"
35 Watt, DC/DC Converters
Features
Independent 5V @ 4.7A and
3.3V @ 3.5A Outputs
Each output fully regulated
35 Watts total output power
Standard 2" x 3" package
UL1950 and EN60950 safety approvals
(BASIC insulation, -D48 model)
Fully isolated, 1500Vdc guaranteed
18-36V or 36-75V input ranges
mark available (75V-input models)
VOUT trim and on/off control
Fully I/O protected
Thermal shutdown
For your moderate-power mixed-logic designs, DATEL’s BMP-5/5-3.3/4-D24
(18-36V input) and BMP-5/5-3.3/4-D48 (36-75V input) are fully isolated DC/DC
converters providing both 5V and 3.3V outputs. Housed in DATEL’s standard 2" x 3"
x 0.5" metal packages, these BMP duals can simultaneously source up to 4.7 Amps
from their 5V outputs and up to 3.5 Amps from their 3.3V outputs. Both outputs are
fully isolated (1500Vdc) and independently line (±1.0%) and load (±1.0%) regulated.
Both models feature input pi filters, input overvoltage shutdown, input reverse-
polarity protection, output overvoltage protection, output current limiting, and thermal
shutdown. Both outputs are controlled via the On/Off Control function (pin 5). The
5 Volt output can be adjusted ±5%.
BMP Model DC/DC’s deliver high efficiency (82%) and are fully specified for
–40 to +100°C operation. Their corrosion-resistant metal cases have non-conductive
baseplates and threaded inserts for easy heat-sink attachment and/or pcb mounting.
These devices satisfy IEC950, UL1950 and EN60950 safety requirements for BASIC
insulation. CE marking is available for "D48" models.
+INPUT
+5V OUTPUT
–INPUT
ON/OFF
CONTROL
(SYNC)
CASE
PWM
CONTROLLER
REFERENCE &
ERROR
AMPLIFIER
ISOLATION
PWM
CONTROLLER
REFERENCE &
ERROR
AMPLIFIER
Figure 1. Simplified Schematic
COMMON
+3.3V OUTPUT
TRIM
DATEL, Inc., Mansfield, MA 02048 (USA) · Tel: (508)339-3000, (800)233-2765 Fax: (508)339-6356 · Email: sales@datel.com · Internet: www.datel.com