DLV-3.3/6-1.87-D24(2001) データシートの表示（PDF） - DATEL Data Acquisition products
部品番号
コンポーネント説明
メーカー
DLV-3.3/6-1.87-D24
(Rev.:2001)
(Rev.:2001)
DATEL Data Acquisition products
DLV-3.3/6-1.87-D24 Datasheet PDF : 5 Pages
| |||
30W, DUAL OUTPUT, MIXED-VOLTAGE DC/DC CONVERTERS
DLV Models
1
+INPUT
2
–INPUT
3
SYNC *
4 ON/OFF
CONTROL
5 RTRIM UP
+3.3V TRIM *
6
+3.3V OUTPUT
OUTPUT 7
RETURN
8
+2.5V OUTPUT
9
+2.5V TRIM
RTRIM UP
+3.3V
LOAD
+2.5V
LOAD
* OPTIONAL PIN
Figure 4. Trim Connections To Increase Output Voltages Using Fixed Resistors
3.3 Volt Trim Up
LN RTUP (kΩ) =
2.84
VO – 2.5
–19.7
2.5 Volt Trim Up
LN RTUP (kΩ) =
5.88
VO – 3.3
–28.7
1.8 Volt Trim Up
LN RTUP (kΩ) =
1.49
VO – 1.8
–14.17
Note: Resistor values are in kΩ. Accuracy
of adjustment is subject to
tolerances of resistors and fac-
tory-adjusted output accuracy.
VO = desired output voltage.
PART NUMBER STRUCTURE
DLV - 3.3 / 6 - 2.5 / 7 - D48 T N
Dual Low Voltage/
Mixed-Voltage Series
V1 Nominal Output Voltage
I1 Maximum Output Current
V2 Nominal Output Voltage
Add T and N suffixes
as desired
Input Voltage Range:
D12 = 10-18 Volts (12V nominal)
D24 = 18-36 Volts (24V nominal)
D48 = 36-75 Volts (48V nominal)
I2 Maximum Output Current
Part Number Suffixes
Standard DLV DC/DC’s provide a Trim function (Pin 9) for the lower
of the two output voltages. A Trim pin (Pin 5) for the higher voltage can
be added by indicating a "T" suffix. An "N" suffix indicates that the On/Off
Control function incorporates negative polarity logic.
No Suffix Pins 5 not installed, positive polarity On/Off Control
T Suffix Pin 5 added for higher voltage Trim option
N Suffix Negative polarity On/Off Control
®
®
INNOVATION and EXCELLENCE
ISO 9001 REGISTERED
DS-0490
6/01
DATEL, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151
Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356
Internet: www.datel.com Email: sales@datel.com
DATEL (UK) LTD. Tadley, England Tel: (01256)-880444
DATEL S.A.R.L. Montigny Le Bretonneux, France Tel: 01-34-60-01-01
DATEL GmbH München, Germany Tel: 89-544334-0
DATEL KK Tokyo, Japan Tel: 3-3779-1031, Osaka Tel: 6-6354-2025
DATEL makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do
not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. The DATEL logo is a registered DATEL, Inc. trademark.
5
Share Link: 