88E1111-XX-RCJ1C000 データシートの表示（PDF） - Unspecified
部品番号
コンポーネント説明
メーカー
88E1111-XX-RCJ1C000 Datasheet PDF : 52 Pages
| |||
88E1111 Product Brief
Integrated 10/100/1000 Ultra Gigabit Ethernet Transceiver
OVERVIEW
FEATURES
The Alaska® Ultra 88E1111 Gigabit Ethernet Trans-
•
ceiver is a physical layer device for Ethernet
•
1000BASE-T, 100BASE-TX, and 10BASE-T applica-
tions. It is manufactured using standard digital CMOS
process and contains all the active circuitry required to •
implement the physical layer functions to transmit and
receive data on standard CAT 5 unshielded twisted pair.
•
The 88E1111 device incorporates the Marvell Virtual
•
Cable Tester® (VCT™) feature, which uses Time
Domain Reflectometry (TDR) technology for the remote
identification of potential cable malfunctions, thus
•
reducing equipment returns and service calls. Using
•
VCT, the Alaska 88E1111 device detects and reports
•
potential cabling issues such as pair swaps, pair polar-
ity and excessive pair skew. The device will also detect
cable opens, shorts or any impedance mismatch in the
•
cable and report accurately within one meter the dis- •
tance to the fault.
•
The 88E1111 device supports the Gigabit Media Inde-
pendent Interface (GMII), Reduced GMII (RGMII),
•
Serial Gigabit Media Independent Interface (SGMII),
•
the Ten-Bit Interface (TBI), and Reduced TBI (RTBI) for
direct connection to a MAC/Switch port.
•
The 88E1111 device incorporates an optional 1.25 GHz •
SERDES (Serializer/Deserializer). The serial interface •
may be connected directly to a fiber-optic transceiver
for 1000BASE-T/1000BASE-X media conversion appli- •
cations. Additionally, the 88E1111 device may be used •
to implement 1000BASE-T Gigabit Interface Converter •
(GBIC) or Small Form Factor Pluggable (SFP) modules.
•
The 88E1111 device uses advanced mixed-signal pro- •
cessing to perform equalization, echo and crosstalk
cancellation, data recovery, and error correction at a
gigabit per second data rate. The device achieves
•
robust performance in noisy environments with very low •
power dissipation.
•
The 88E1111 device is offered in three different pack-
age options including a 117-Pin TFBGA, a 96-pin BCC •
featuring a body size of only 9 x 9 mm, and a 128 PQFP
package.
•
10/100/1000BASE-T IEEE 802.3 compliant
Supports GMII, TBI, reduced pin count GMII
(RGMII), reduced pin count TBI (RTBI), and serial
GMII (SGMII) interfaces
Integrated 1.25 GHz SERDES for 1000BASE-X
fiber applications
Four RGMII timing modes
Energy Detect and Energy Detect+ low power
modes
Three loopback modes for diagnostics
“Downshift” mode for two-pair cable installations
Fully integrated digital adaptive equalizers, echo
cancellers, and crosstalk cancellers
Advanced digital baseline wander correction
Automatic MDI/MDIX crossover at all speeds of
operation
Automatic polarity correction
IEEE 802.3u compliant Auto-Negotiation
Software programmable LED modes including LED
testing
Automatic detection of fiber or copper operation
Supports IEEE 1149.1 JTAG
Two-Wire Serial Interface (TWSI) and MDC/MDIO
CRC checker, packet counter
Packet generation
Virtual Cable Tester (VCT)
Auto-Calibration for MAC Interface outputs
Requires only two supplies: 2.5V and 1.0V (with
1.2V option for the 1.0V supply)
I/Os are 3.3V tolerant
Low power dissipation Pave = 0.75W
117-Pin TFBGA, 96-Pin BCC, and 128 PQFP
package options
117-Pin TFBGA and 96-Pin BCC packages avail-
able in Commercial or Industrial grade
RoHS 6/6 compliant packages available
Copyright © 2009 Marvell
March 4, 2009, Advance
Document Classification: Proprietary Information
Doc. No. MV-S105540-00, Rev. --
Page 3
Share Link: 