
NXP Semiconductors.
General description
The UJA1079 core System Basis Chip (SBC) replaces the basic discrete components commonly found in Electronic Control Units (ECU) with a Local Interconnect Network (LIN) interface.
The UJA1079 supports the networking applications used to control power and sensor peripherals by using the LIN interface as a local sub-bus.
FEATUREs and benefits
General
■ Contains LIN ECU functions:
◆ LIN transceiver
◆ Scalable 3.3 V or 5 V voltage regulator delivering up to 250 mA for a microcontroller and peripheral circuitry; an external PNP transistor can be connected for better heat distribution over the PCB
◆ Watchdog with Window and Timeout modes and on-chip oscillator
◆ Serial Peripheral Interface (SPI) for communicating with the microcontroller
◆ ECU power management system
■ Designed for automotive applications:
◆ Excellent ElectroMagnetic Compatibility (EMC) performance
◆ ±8 kV ElectroStatic Discharge (ESD) protection Human Body Model (HBM) on the LIN bus pin and the wake pins
◆ ±6 kV ElectroStatic Discharge (ESD) protection IEC 61000-4-2 on the LIN bus pin and the wake pins
◆ ±58 V short-circuit proof LIN bus pin
◆ Battery and LIN bus pins are protected against transients in accordance with ISO 7637-3
■ Small 6.1 mm × 11 mm HTSSOP32 package with low thermal resistance
■ Pb-free; RoHS and dark green compliant
LIN transceiver
■ LIN 2.1 compliant LIN transceiver
■ Compliant with SAE J2602
■ Downward compatible with LIN 2.0 and LIN 1.3
■ Low slope mode for optimized EMC performance
■ Integrated LIN termination diode at pin DLIN
Power management
■ Wake-up via LIN or local wake pins with wake-up source detection
■ 2 wake pins:
◆ WAKE1 and WAKE2 inputs can be switched off to reduce current flow
◆ Output signal (WBIAS) to bias the wake pins, selectable sampling time of 16 ms or 64 ms
■ Standby mode with very low standby current and full wake-up capability; V1 active to maintain supply to the microcontroller
■ Sleep mode with very low sleep current and full wake-up capability
(Continue ...)