128 Mbit (16 Mbyte) MirrorBit® Flash Non-Volatile Memory CMOS 3.0 Volt Core
Serial Peripheral Interface with Multi-I/O

General Description
The Spansion S25FL127S device is a flash non-volatile memory product using:

■ MirrorBit technology - that stores two data bits in each memory array transistor
■ Eclipse architecture - that dramatically improves program and erase performance
■ 65 nm process lithography

This device connects to a host system via a Serial Peripheral Interface (SPI). Traditional SPI single bit serial input and output (SIngle I/O or SIO) is supported as well as optional two bit (Dual I/O or DIO) and four bit (Quad I/O or QIO) serial commands. This multiple width interface is called SPI Multi-I/O or MIO.

FEATUREs
■ Density
   – 128 Mbits (16 Mbytes)
■ Serial Peripheral Interface (SPI)
   – SPI Clock polarity and phase modes 0 and 3
   – Extended Addressing: 24- or 32-bit address options
   – Serial Command set and footprint compatible with S25FL-A, S25FL-K, and S25FL-P SPI families
   – Multi I/O Command set and footprint compatible with S25FL-P SPI family
■ READ Commands
   – Normal, Fast, Dual, Quad
   – AutoBoot - power up or reset and execute a Normal or Quad read command automatically at a preselected address
   – Common Flash Interface (CFI) data for configuration information.
■ Programming (0.8 Mbytes/s)
   – 256- or 512-byte Page Programming buffer options
   – Quad-Input Page Programming (QPP) for slow clock systems
■ Erase (0.5 Mbytes/s)
   – Hybrid sector size option - physical set of sixteen 4-kbyte sectors at
top or bottom of address space with all remaining sectors of
64 kbytes
   – Uniform sector option - always erase 256-kbyte blocks for software compatibility with higher density and  future devices.
■ Cycling Endurance
   – 100,000 Program-Erase Cycles per sector minimum
■ Data Retention
   – 20 Year Data Retention typical
■ Security features
   – One Time Program (OTP) array of 1024 bytes
   – Block Protection:
      – Status Register bits to control protection against program or erase of a contiguous range of sectors.
      – Hardware and software control options
   – Advanced Sector Protection (ASP)
      – Individual sector protection controlled by boot code or password
■ Spansion® 65 nm MirrorBit Technology with Eclipse™ Architecture
■ Supply Voltage: 2.7V to 3.6V
■ Temperature Range:
   – Industrial (-40°C to +85°C)
   – Automotive In-Cabin (-40°C to +105°C)
■ Packages (all Pb-free)
   – 8-lead SOIC (208 mil)
   – 8-contact USON 6 x 5 mm
   – BGA-24 6 x 8 mm
   – 5 x 5 ball (FAB024) and 4 x 6 ball (FAC024) footprint options
   – Known Good Die and Known Tested Die