The NCP1654 is a controller for Continuous Conduction Mode (CCM) Power Factor Correction step−up pre−converters. It controls the power switch conduction time (PWM) in a fixed frequency mode and in dependence on the instantaneous coil current.
Housed in a SO8 package, the circuit minimizes the number of external components and drastically simplifies the PFC implementation. It also integrates high safety protection features that make the NCP1654 a driver for robust and compact PFC stages like an effective input power runaway clamping circuitry.

FEATUREs
• IEC61000−3−2 Compliant
• Average Current Continuous Conduction Mode
• Fast Transient Response
• Very Few External Components
• Very Low Startup Currents (<75 μA)
• Very Low Shutdown Currents (< 400 μA)
• Low Operating Consumption
• ±1.5 A Totem Pole Gate Drive
• Accurate Fully Integrated 65/133/200 kHz Oscillator
• Latching PWM for cycle−by−cycle Duty−Cycle Control
• Internally Trimmed Internal Reference
• Undervoltage Lockout with Hysteresis
• Soft−Start for Smoothly Startup Operation
• Shutdown Function
• Pin to Pin Compatible with Industry Standard
• This is a Pb−Free Device

Safety Features
• Inrush Currents Detection
• Overvoltage Protection
• Undervoltage Detection for Open Loop Detection or Shutdown
• Brown−Out Detection
• Soft−Start
• Accurate Overcurrent Limitation
• Overpower Limitation

Typical Applications
• Flat TVs, PC Desktops
• AC Adapters
• White Goods, other Off−line SMPS