datasheetbank_Logo
búsqueda de Hoja de datos y gratuito Fichas de descarga
HOME  >>>  ON Semiconductor  >>> CAT5411YI-25-T2 PDF

CAT5411YI-25-T2(2009) Hoja de datos - ON Semiconductor

CAT5411 image

Número de pieza
CAT5411YI-25-T2

Other PDF
  lastest PDF  

PDF
DOWNLOAD     

page
16 Pages

File Size
253.6 kB

Fabricante
ONSEMI
ON Semiconductor 

DESCRIPTION
   The CAT5411 is two Digitally Programmable Potentiometers (DPPs™) integrated with control logic and 16 bytes of NVRAM memory. Each DPP consists of a series of 63 resistive elements connected between two externally accessible end points. The tap points between each resistive element are connected to the wiper outputs with CMOS switches. 


FEATURES
◾ Two linear-taper digitally programmable
   potentiometers
◾ 64 resistor taps per potentiometer
◾ End to end resistance 2.5 kΩ, 10 kΩ, 50 kΩ or
   100 kΩ
◾ Potentiometer control and memory access via
   SPI interface: Mode (0, 0) and (1, 1)
◾ Low wiper resistance, typically 80
◾ Nonvolatile memory storage for up to four
   wiper settings for each potentiometer
◾ Automatic recall of saved wiper settings at
   power up
◾ 2.5 to 6.0 volt operation
◾ Standby current less than 1 µA
◾ 24-lead SOIC and 24-lead TSSOP
◾ Industrial temperature ranges


Número de pieza
componentes Descripción
Ver
Fabricante
Dual Digitally Programmable Potentiometers (DPP™) with 256 Taps and SPI Interface ( Rev : 2008 )
PDF
Catalyst Semiconductor => Onsemi
Dual Digitally Programmable Potentiometers (DPP™) with 256 Taps and SPI Interface
PDF
Catalyst Semiconductor => Onsemi
Dual Digitally Programmable Potentiometers (DPP™) with 256 Taps and SPI Interface ( Rev : 2009 )
PDF
ON Semiconductor
Dual Digital Potentiometers (DP) with 64 Taps and SPI Interface
PDF
Copal Electronics
Dual Digitally Programmable Potentiometers (DPP™) with 64 Taps and 2-wire Interface
PDF
Catalyst Semiconductor => Onsemi
Quad Digitally Programmable Potentiometers (DPP™) with 64 Taps and 2-wire Interface
PDF
Catalyst Semiconductor => Onsemi
Quad Digital Potentiometers (DP) with 64 Taps and SPI Interface
PDF
Copal Electronics
Dual Digitally Programmable Potentiometers (DPP) with 256 Taps & I2C Compatible Interface ( Rev : 2009 )
PDF
ON Semiconductor
Dual Digitally Programmable Potentiometers (DPP) with 256 Taps & I2C Compatible Interface
PDF
ON Semiconductor
Dual Digitally Programmable Potentiometers (DPP™) with 256 Taps and 2-wire Interface
PDF
Catalyst Semiconductor => Onsemi

Share Link: GO URL

All Rights Reserved© datasheetbank.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]