Número de pieza
74LVC823ADB
componentes Descripción
Other PDF
no available.
PDF
page
12 Pages
File Size
100.8 kB
Fabricante
Philips Electronics
HOME >>> Philips Electronics >>> 74LVC823ADB PDF
74LVC823ADB Hoja de datos - Philips Electronics
Philips Electronics
DESCRIPTION
The 74LVC823A is a high performance, low-power, low-voltage Si-gate CMOS device and superior to most advanced CMOS compatible TTL families.
FEATURES
• 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic
• Supply voltage range of 2.7V to 3.6V
• Complies with JEDEC standard no. 8-1A
• Inputs accept voltages up to 5.5V
• CMOS low power consumption
• Direct interface with TTL levels
• 9-bit positive edge-triggered register
• Independent register and 3-State buffer operation
• Flow-through pin-out architecture
Número de pieza
componentes Descripción
Ver
Fabricante
9-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive edge-trigger; 3-state
NXP Semiconductors.
10-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger (3-State) ( Rev : 2004 )
Philips Electronics
Octal D-type flip-flop with 5-volt tolerant inputs/outputs; positive edge-trigger (3-State)
Philips Electronics
Octal D-type flip-flop with 5-volt tolerant inputs/outputs; positive edge-trigger (3-State)
Philips Electronics
10-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger (3-State)
Philips Electronics
Octal D-type flip-flop; 5 V tolerant inputs/outputs; positive-edge trigger; 3-state
NXP Semiconductors.
10-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive-edge trigger; 3-state
Unspecified
10-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive-edge trigger; 3-state
NXP Semiconductors.
Octal D-type flip-flop with 5 V tolerant inputs/outputs; positive edge-trigger; 3-state
NXP Semiconductors.
16-bit edge triggered D-type flip-flop with 5 Volt tolerant inputs/outputs (3-State)
Philips Electronics
Share Link: 