74LVC574ADB Hoja de datos - Philips Electronics
Número de pieza
74LVC574ADB
Fabricante

Philips Electronics
DESCRIPTION
The 74LVC574A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.
FEATURES
• 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic
• Supply voltage range of 2.7V to 3.6V
• Complies with JEDEC standard no. 8-1A
• Inputs accept voltages up to 5.5V
• CMOS low power consumption
• Direct interface with TTL levels
• High impedance when VCC = 0V
• 8-bit positive edge-triggered register
• Independent register and 3-State buffer operation
• Flow-through pin-out architecture
Page Link's:
1
2
3
4
5
6
7
8
9
10
More Pages
Número de pieza
componentes Descripción
Ver
Fabricante
Octal D-type flip-flop with 5-volt tolerant inputs/outputs; positive edge-trigger (3-State)
Philips Electronics
Octal D-type flip-flop; 5 V tolerant inputs/outputs; positive-edge trigger; 3-state
NXP Semiconductors.
Octal D-type flip-flop with 5 V tolerant inputs/outputs; positive edge-trigger; 3-state
NXP Semiconductors.
10-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger (3-State) ( Rev : 2004 )
Philips Electronics
9-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger (3-State)
Philips Electronics
10-bit D-type flip-flop with 5-volt tolerant inputs/outputs; positive-edge trigger (3-State)
Philips Electronics
10-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive-edge trigger; 3-state
Unspecified
10-bit D-type flip-flop with 5 V tolerant inputs/outputs; positive-edge trigger; 3-state
NXP Semiconductors.
Octal D-type flip-flop; positive-edge trigger; 3-state
NXP Semiconductors.
Octal D-type flip-flop; positive-edge trigger (3-State)
Philips Electronics