74LVC573APWDH Hoja de datos - Philips Electronics
Número de pieza
74LVC573APWDH
Fabricante

Philips Electronics
DESCRIPTION
The 74LVC573A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.
Inputs can be driven from either 3.3V or 5V devices. In 3-State operation, outputs can handle 5V. This feature allows the use of these devices as translators in a mixed 3.3V/5V environment.
FEATURES
• 5-volt tolerant inputs/outputs, for interfacing with 5-volt logic
• Supply voltage range of 2.7V to 3.6V
• Complies with JEDEC standard no. 8-1A
• Inputs accept voltages up to 5.5V
• CMOS low power consumption
• Direct interface with TTL levels
• High impedance when VCC = 0V
• Flow-through pin-out architecture
Page Link's:
1
2
3
4
5
6
7
8
9
10
More Pages
Número de pieza
componentes Descripción
Ver
Fabricante
Octal D-type transparent latch with 5-volt tolerant inputs/outputs (3-State)
Philips Electronics
Octal D-type transparent latch with 5-volt tolerant inputs/outputs; damping resistor (3-State)
Philips Electronics
Octal D-type transparent latch with 5 V tolerant inputs/outputs; 3-state
NXP Semiconductors.
Octal D-type transparent latch with 5 V tolerant inputs/outputs; 3-state ( Rev : 2018 )
NXP Semiconductors.
Octal D-type transparent latch with 5 V tolerant inputs/outputs; 3-state
NXP Semiconductors.
10-bit transparent latch with 5-volt tolerant inputs/outputs (3-State)
Philips Electronics
Octal D-Type Latch with 3-State Outputs With 5 V−Tolerant Inputs ( Rev : 2014 )
ON Semiconductor
Octal D-Type Latch with 3-State Outputs With 5 V−Tolerant Inputs
Motorola => Freescale
Octal D-Type Latch with 3-State Outputs With 5 V−Tolerant Inputs
ON Semiconductor
Octal D-Type Transparent Latch with 3-STATE Outputs
Fairchild Semiconductor