74LVC2245ABQ Hoja de datos - Philips Electronics
Número de pieza
74LVC2245ABQ
Fabricante

Philips Electronics
DESCRIPTION
The 74LVC2245A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.
Inputs can be driven from either 3.3 or 5 V devices. In 3-state operation, outputs can handle 5 V. These features allow the use of these devices as translators in a mixed 3.3 and 5 V environment.
The 74LVC2245A is an octal transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions.
The 74LVC2245A features an output enable (OE) input for easy cascading and a send/receive (DIR) input for direction control. OE controls the outputs so that the buses are effectively isolated.
The 74LVC2245A is designed with 30 Ω series termination resistors in both HIGH and LOW output stages to reduce line noise.
FEATURES
• 5 V tolerant inputs/outputs for interfacing with 5 V logic
• Wide supply voltage range from 1.2 to 3.6 V
• CMOS low power consumption
• Direct interface with TTL levels
• Inputs accept voltages up to 5.5 V
• Integrated 30 Ω termination resistors
• Complies with JEDEC standard no. 8-1A
• ESD protection:
HBM EIA/JESD22-A114-A exceeds 2000 V
MM EIA/JESD22-A115-A exceeds 200 V.
• Specified from −40 to +85 °C and −40 to +125 °C.
Page Link's:
1
2
3
4
5
6
7
8
9
10
More Pages
Número de pieza
componentes Descripción
Ver
Fabricante
Octal transceiver with direction pin, 30 Ω series termination resistors; 5 V tolerant input/output; 3-state
NXP Semiconductors.
16-bit transceiver with direction pin; 30 Ω series termination resistors; 5 V tolerant input/output; 3-state
Philips Electronics
Octal transceiver with direction pin and 30 Ω series termination resistors (3-State)
NXP Semiconductors.
32-bit bus transceiver with direction pin; 30 Ω series termination resistors; 5 V tolerant; 3-state
NXP Semiconductors.
Octal transceiver with direction pin with 30Ω series termination resistors (3-State)
Philips Electronics
32-bit bus transceiver with direction pin; 30 Ω series termination resistors; 5 V tolerant; 3-state
Philips Electronics
Octal buffer/line driver with 30 Ω series termination resistors; 5 V input/output tolerant; 3-state
Philips Electronics
Octal bus transceiver with direction pin with 5 V tolerant input/outputs (3-state)
Philips Electronics
Octal buffer/line driver; 30 series termination; 5 V tolerant input/output; 3-state
NXP Semiconductors.
32-bit bus transceiver with direction pin; 30 Ω series temination resistors; 5 V tolerant; 3-state ( Rev : 2007 )
NXP Semiconductors.