UPC2766GS-E1 Ver la hoja de datos (PDF) - NEC => Renesas Technology

Número de pieza

componentes Descripción

fabricante

UPC2766GS-E1

WIDE BAND IQ DEMODULATOR FOR DIGITAL VIDEO/DATA RECEIVER

NEC => Renesas Technology 

µPC2766GR/GS

RECOMMENDED SOLDERING CONDITIONS

The following conditions (see table below) must be met when soldering this product.

Please consult with our sales offices in case other soldering process is used or in case soldering is done under

different conditions.

For details of recommended soldering conditions for surface mounting, refer to information document

SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).

µPC2766GR

Soldering process

Infrared ray reflow

VPS

Wave soldering

Partial heating method

Soldering conditions

Peak package’s surface temperature: 235 °C or below,

Reflow time: 30 seconds or below (210 °C or higher),

Number of reflow process: 3, Exposure limitNote: None

Peak package’s surface temperature: 215 °C or below,

Reflow time: 40 seconds or below (200 °C or higher),

Number of reflow process: 3, Exposure limitNote: None

Solder temperature: 260 °C or below,

Flow time: 10 seconds or below,

Number of flow process: 1, Exposure limit Note: None

Terminal temperature: 300 °C or below,

Flow time: 3 seconds or below,

Exposure limit Note: None

Symbol

IR35-00-3

VP15-00-3

WS60-00-1

Note Exposure limit before soldering after dry-pack package is opened.

Storage conditions: 25 °C and relative humidity at 65 % or less.

Caution Do not apply more than single process at once, except for “Partial heating method”.

14

Data Sheet P10193EJ4V0DS00

Share Link: