T8xC5101/02
Reduced EMI Mode
As there is no Port 0 nor Port 2 outputted from this device, there is no need to output
ALE. EMI are then reduced intrinsically.
The bit which controls ALE disabling in Rx devices is A0 (bit 0) in register AUXR. As
explained earlier for bit EXTRAM, writing any value to AO will have no effect on the
device behavior.
Table 16. AUXR Register
AUXR - Auxiliary Register (8Eh)
7
6
5
4
3
2
1
0
-
-
-
-
-
-
EXTRAM
AO
Bit
Bit Number Mnemonic Description
7
-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
6
-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
5
-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
4
-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
3
-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
2
-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
EXTRAM bit
1
EXTRAM Writing to this bit will have no effect. The value read from this bit is
indeterminate.
ALE Output bit
0
AO
Writing to this bit will have no effect. The value read from this bit is
indeterminate.
Reset Value = XXXX XX00b
Not bit addressable
31
4233H–8051–02/08