Overview
1
Overview
STw5098
● Dual 20 bit audio resolution, 8kHz to 96kHz independent rate ADC and DAC
● Dual I2S/PCM digital interfaces for dual master
● Sustain complex voice and audio flow with or without mixing
● Two I2C/SPI compatible independent control interfaces
● Asynchronous sampling ADC and DAC that do not require oversampled clock and
information on the audio data sampling frequency (fs). Jitter tolerant fs
● Wide master clock range from 4MHz to 32MHz
● Two stereo headphones drivers, hand free loudspeaker driver, line out drivers
● Mixable analog line inputs
● Voice filters: 8/16kHz with voice channel filters
● Automatic gain control for microphone and line-in inputs
● Four programmable master/slave serial audio data interfaces: I2S, SPI, PCM
compatible and other formats
● Frequency programmable clock outputs
● Multibit Σ∆ modulators with data weighted averaging ADC and DAC
● Four DSP functions for bass-treble-volume control, mute, mono/stereo selection, voice
channel filters, de-emphasis filter and dynamic compression
● 93 dB dynamic range ADC, 0.001% THD with full scale with full scale output @ 2.7V
● 95 dB dynamic range DAC, 0.02% THD performance @ 2.7V over 16Ω load
Analog inputs
● Selectable stereo differential or single-ended microphone amplifier inputs with 51dB
range programmable gain
● 2 microphone biasing output
● Microphone plug-in and push-button detection input
● Selectable stereo differential or single-ended line inputs with 38dB range
programmable gain
Analog output drivers
● 2 Stereo headphones outputs. driving capability: 40mW (0.1% THD) over 16Ω with
40dB range programmable gain
● Common mode voltage headphones driver (phantom ground)
● 1 Balanced loudspeaker output with driving capability up to 500mW (VCCLS>3.5V; 1%
THD) over 8Ω with 30dB range programmable gain
● 1 Balanced earphone output with driving capability up to 125mW
● Transient suppression filter during power up and power down
● Balanced/unbalanced stereo line outputs with 1 kΩ driving capability
8/85