MDC-163 Ver la hoja de datos (PDF) - M/A-COM Technology Solutions, Inc.
Número de pieza
componentes Descripción
fabricante
MDC-163 Datasheet PDF : 3 Pages
| |||
MDC-163
Termination-Insensitive Biasable Mixer,
1 - 6 GHz
Features
C-2
• LO Drive: 0 dBm
• Intermodulation Ratio Insensitive to
IF Ports Mismatches
• Conversion Loss: 7 dB Typical Midband
• Impedance: 50 Ohms Nominal
• Maximum Input Power: 500 mW max. @ 25°C,
Derated 6.4 mW/°C
• Low Power: +24 dBm Max.
• DC Bias: +5, -5 VDC @12 mA each
• MIL-STD-883 Screening Available
Description
The unique design of the termination insensitive
mixer (TIM) enables it to apply high reverse voltage
to diodes during their “off” phase, in the LO cycle.
This allows for higher power level performance with
minimum distortion. In addition the TIM has internal
loads that provide a good match and also absorb
mixer generated LO frequency terms. Combined,
these features give the mixer its insensitivity to
external mismatches, plus superior VSWR. Applied
bias allows this mixer to perform at low LO power
levels.
Rev. V3
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
• India Tel: +91.80.4155721
• China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and product information.
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Share Link: 