MD-161 Ver la hoja de datos (PDF) - M/A-COM Technology Solutions, Inc.

Número de pieza

componentes Descripción

fabricante

MD-161

Termination Insensitive Mixer, 1 - 500 MHz

M/A-COM Technology Solutions, Inc. 

MD-161

Termination Insensitive Mixer,

1 - 500 MHz

Features

• Third Order Intermodulation Ratio is Insensitive

to Port Mismatches

• Conversion Loss: 6dB Typical Midband

• DC Coupled IF Port

• High Level Phase Detector

• Impedance: 50 Ohms Nominal

• Maximum Input Power: 350 mW Max @ 25°C,

Derated to 85°C @ 3.2 mW/°C

• LO Power: +24 dBm Max.

• IF Port Current: 50 mA Max.

• MIL-STD-883 Screening Available

Description

The unique design of the termination insensitive

mixer (TIM) enables it to apply high reverse voltage

to diodes during their “off” phase, in the LO cycle.

This allows for higher power level performance with

minimum distortion. In addition the TIM has internal

loads that provide a good match and also absorb

mixer generated LO frequency terms. Combined,

these features give the mixer its

insensitivity to external mismatches, plus superior

VSWR.

FP-2

Rev. V3

Pin Configuration

Pin No.

1

2

3

4

Function

GND

GND

GND

IF

Pin No.

5

6

7

8

Function

LO

GND

GND

RF

1

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

• India Tel: +91.80.4155721

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

Commitment to produce in volume is not guaranteed.

changes to the product(s) or information contained herein without notice.

Share Link: