IDT8535-01 Ver la hoja de datos (PDF) - Integrated Device Technology
Número de pieza
componentes Descripción
fabricante
IDT8535-01 Datasheet PDF : 11 Pages
| |||
IDT8535-01
LOW SKEW, 1-TO-4 LVCMOS-TO-3.3V LVPECL
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES
POWER SUPPLY CHARACTERISTICS - INDUSTRIAL
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Unit
VDD
Positive Supply Voltage
3.135
3.3
3.465
V
IEE
Power Supply Current
—
—
55
mA
DC ELECTRICAL CHARACTERISTICS, LVCMOS / LVTTL - INDUSTRIAL
Symbol
VIH
VIL
Parameter
Input Voltage HIGH
Input Voltage LOW
IIH
Input Current HIGH
IIL
Input Current LOW
CLK0, CLK1
CLK_EN, CLK_SEL
CLK0, CLK1, CLK_SEL
CLK_EN
CLK0, CLK1, CLK_SEL
CLK_EN
Test Conditions
VIN = VDD = 3.465V
VIN = VDD = 3.465V
VIN = 0V, VDD = 3.465V
VIN = 0V, VDD = 3.465V
Min.
Typ.
Max.
Unit
2
VDD + 0.3
V
-0.3
1.3
V
-0.3
0.8
150
µA
5
-5
µA
-150
DC ELECTRICAL CHARACTERISTICS, LVPECL - INDUSTRIAL
Symbol
VOH
VOL
VSWING
Parameter
Output Voltage HIGH(1)
Output Voltage LOW(1)
Peak-to-Peak Output Voltage Swing
Test Conditions
Min.
VDD - 1.4
VDD - 2
0.6
Typ.
Max.
Unit
VDD - 1
V
VDD - 1.7
V
0.85
V
NOTE:
1. Outputs terminated with 50Ω to VDD - 2V.
AC ELECTRICAL CHARACTERISTICS - INDUSTRIAL
All parameters measured at 266MHz unless noted otherwise;
Cycle-to-cycle jitter on input = jitter on output; the part does not add jitter
Symbol
FMAX
tPD
tSK(O)
tSK(PP)
tR
tF
odc
Parameter
Output Frequency
Propagation Delay(1)
Output Skew(2,4)
Part-to-Part Skew(3,4)
Output Rise Time
Output Fall Time
Output Duty Cycle
Test Conditions
Min.
f ≤ 266MHz
1
20 - 80% @ 50MHz
300
20 - 80% @ 50MHz
300
48
Typ.
Max.
Unit
266
MHz
1.9
ns
30
ps
200
ps
700
ps
700
ps
50
52
%
NOTES:
1. Measured from the VDD/2 of the input to the differential output crossingpoint.
2. Defined as skew between outputs as the same supply voltage and with equal load conditions. Measured at the output differential crosspoints
3. Defined as skew between outputs on different devices operating at the same supply voltages and with equal load conditions. Using the same type of inputs on each
device, the outputs are measured at the differential crosspoints.
4. This parameter is defined in accordance with JEDEC Standard 65.
5
Share Link: 