HD64570 Ver la hoja de datos (PDF) - Hitachi -> Renesas Electronics

Número de pieza

componentes Descripción

fabricante

HD64570

Serial Communications Adaptor

Hitachi -> Renesas Electronics 

Section 1 Overview

1.1 Overview

The HD64570 serial communications adaptor (SCA) converts parallel data to serial data for

communication with other devices. Its two independent, full-duplex transceivers support both

synchronous (bit-synchronous or byte-synchronous) and asynchronous communication. Extensive

protocol functions are provided.

The SCA chip provides FIFO transmit and receive buffers with 32 stages each and a four-channel

direct memory access controller (DMAC) with chained-block transfer facilities, enabling high-

speed transfer of data between SCA and memory. A built-in bus arbiter and 16-bit bus interface

support high-performance system designs.

1.2 Features

• Data transfer rate: 50 bits/s to 7.1 Mbits/s (f = 10 MHz),

50 bits/s to 12 Mbits/s (f = 16.7 MHz)

50 bits/s to 5.7 Mbits/s (f = 8 MHz)*

• Protocol support

_ Asynchronous (ASYNC): 5 to 8 bits + parity

_ Byte synchronous (COP): bisync, X.21, DDCMP, etc.

_ Bit synchronous (BOP): frame relay, HDLC, ™SDLC, X.25 link level (LAPB), LAPD etc.

• Highly efficient data transfer: two 32-byte FIFOs (transmit/receive) per channel

• Error detection: parity (asynchronous)

CRC-16, CRC-CCITT (byte- and bit-synchronous)

™SDLC is a trademark of International Business Machine.

Transmission codes: NRZ, NRZI, FM0, FM1, Manchester

Operating modes: normal operating mode (full-duplex), auto echo, local loop back

DMA transfer: on-chip DMAC with four channels and chained-block transfer capability

Address space: 16 Mbytes

Bus interface: connects to 64180-, 8086-, and 68000-system 8-/16-bit MPU buses

Timers: time-out detection, etc.

Power supply: 5 V ± 10% (−20 to 75°C) for 10-MHz chip,

5 V ± 5% (0 to 70°C) for 16.7-MHz chip

5 V ± 10% (−40 to 85°C) for 8-MHz chip*

Rev. 0, 07/98, page 1 of 453

Share Link: