GS1532(2005) Ver la hoja de datos (PDF) - Gennum -> Semtech
Número de pieza
componentes Descripción
fabricante
GS1532 Datasheet PDF : 52 Pages
| |||
GS1532 Data Sheet
1.2 Pin Descriptions
Table 1-1: Pin Descriptions
Pin
Number
Name
1
CP_VDD
Timing
–
2
PD_GND
–
3
PD_VDD
–
4, 6-8, 10,
14-17, 31,
65, 66, 70,
71
5
9
NC
RSV
DVB_ASI
–
–
Non
Synchronous
11
SD/HD
Non
Synchronous
12
20bit/10bit
Non
Synchronous
Type
Power
Power
Power
–
–
Input
Input
Input
Description
Power supply connection for the charge pump. Connect to +3.3V DC
analog.
Ground connection for the phase detector. Connect to analog GND.
Power supply connection for the phase detector. Connect to +1.8V DC
analog.
No connect.
Reserved. Connect to Analog GND.
CONTROL SIGNAL INPUT
Signal levels are LVCMOS/LVTTL compatible.
When set HIGH in conjunction with SD/HD = HIGH and SMPTE_BYPASS
= LOW, the device will be configured to operate in DVB-ASI mode.
When set LOW, the device will not support the encoding of received
DVB-ASI data.
CONTROL SIGNAL INPUT
Signal levels are LVCMOS/LVTTL compatible.
When set LOW, the device will be configured to transmit signal rates of
1.485Gb/s or 1.485/1.001Gb/s only.
When set HIGH, the device will be configured to transmit signal rates of
270Mb/s only.
CONTROL SIGNAL INPUT
Signal levels are LVCMOS/LVTTL compatible.
Used to select the input data bus width in SMPTE or Data-Through
modes. This signal is ignored in DVB-ASI mode.
When set HIGH, the parallel input will be 20-bit demultiplexed data.
When set LOW, the parallel input will be 10-bit multiplexed data.
21498 - 6 June 2005
6 of 52
Share Link: 