DF11-30SCF Ver la hoja de datos (PDF) - HIROSE ELECTRIC

Número de pieza

componentes Descripción

fabricante

DF11-30SCF

2mm Double-Row Connector (Product Compliant to UL/CSA Standard)

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

DF11 Seriesq2mm Double-Row Connector (Product Compliant to UL/CSA Standard)

sPrecautions

1. Recommended Temperature Profile (SMT)

Temperature (ç)

250

230

200

180±10

150

100 to 120s

100

10s max

60s max

Time (S)

Note1: UP to 2 cycles of Reflow soldering are possible under the same conditions, provided that

there is a return to normal temperature between the first and second cycle

Note2: The temperature profile indicates the board surface temperature at the point of contacts

with the connector terminals.

Note3: This reflow profile is for the connectors packaged in embossed tape(reel), with desiccant in

the package.

Temperature (ç)

240

200

165±5

10s max

230

60s max

150

90 to 120s

100

Time (S)

Note4: Reflow temperature for SMT connectors in another package is 240ç, 10 sec.max.

2. Recommended Manual Soldering Condition (SMT) Soldering iron temperature: 290±10ç, Soldering time: Within 2 seconds

3. Recommended Screen Thickness (SMT) 0.15 to 0.2mm

4. Board Warp age (SMT)

Based on the both connector edges, 0.03mm max. is allowed in the connector center area.

Flow: 250ç for 10 seconds

5. Recommended Soldering Condition(Through hole)

Manual soldering: 290ç for 2 seconds

6. Cleaning Condition

Refer to the "Nylon Connector Use Hand book".

7. Connection Condition

Refer to the "Nylon Connector Use Hand book".

116

Share Link: