RP30-2415DEW Ver la hoja de datos (PDF) - RECOM Electronic GmbH
Número de pieza
componentes Descripción
fabricante
RP30-2415DEW Datasheet PDF : 4 Pages
| |||
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25°C unless otherwise noted)
Weight
Dimensions
MTBF (see Note 2)
RP30-S_DEW
Series
48g
50.8 x 40.6 x 10.2mm
1315 x 103 hours
Notes :
1. An external filter capacitor is required for normal operation. The capacitor should be capable of handing 1A ripple current for 48V/24V models.
RECOM suggest: Nippon chemi-con KMF series, 220µF/100V, ESR 90m Ω.
2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C (Ground fixed and controlled environment).
3. Simulated source impedance of 12µH. 12µH inductor in series with +Vin.
4. Maximum value at nominal input voltage and full load of standard type.
5. Typical value at nominal input voltage and full load.
6. Test by minimum Vin and constant resistor load.
7. The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to negative input.
Positive logic ON/OFF is standard, no suffix (Ex. RP30-2405SEW)
Negative logic ON/OFF is marked with suffix-N (Ex. RP30-2405SEW/N).
8. Heat sink is optional and P/N: 7G-0011A.
9. The dual output required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage
these devices, however they may not meet all listed specification.
10.See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle
projection
50.80
40.60
10.20
dia.
1.0
45.70
17.80
1
5.10
2
15.20
4
Bottom View
5
10.20 12.70
6
7
17.80
10.20
8
5.6
Pin Connections
Pin #
Single
Dual
1
+Vin
+Vin
2
-Vin
-Vin
4^
CTRL
CTRL
5
No Pin
+Vout
6
+Vout
Com
7
-Vout
-Vout
8
Trim
Trim
Pin Pitch Tolerance ±0.35 mm
External Output Trimming
Output can be externally trimmed by using the method
shown below.
( ) for dual output trim
Trim Up
7(7)
Trim Down
8(8)
RU
RD
8(8)
6(5)
www.recom-international.com
July-2006
269
Share Link: 