M52761FP Ver la hoja de datos (PDF) - MITSUBISHI ELECTRIC
Número de pieza
componentes Descripción
fabricante
M52761FP Datasheet PDF : 7 Pages
| |||
MITSUBISHI ICs (TV)
M52761SP/FP
PLL-SPLIT VIF/SIF IC
THE NOTE IN THE SYSTEM SETUP
M52761FP has 2 power supply pins of Vcc (pin 14) and Vreg.OUT
(pin 17) .
Pin 14 is for AFT output, RF AGC output circuits and 5V regulated
power supply circuit and Pin 17 is for the other circuit blocks.
In case M52761FP is used together with other ICs like VIF
operating at more than 5V, the same supply voltage as that of
connected ICs is applied to VCC and Vreg.Out is opened. The other
circuit blocks, connected to Vreg.OUT are powered by internal 5V
regulated power supply.
In case the connecting ICs are operated at 5V, 5V is supplied to
both VCC and Vreg.OUT.
INPUT SIGNAL
SG No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Signals (50Ω termination)
f0=58.75MHz AM20kHz 77.8% 90dBµ
f0=58.75MHz 90dBµ CW
f0=58.75MHz 90dBµ CW (Mixed signal)
f2=Frequency variable 70dBµ CW (Mixed signal)
f0=58.75MHz AM20kHz 77.8% level variable
f0=58.75MHz AM20kHz 14.0% level variable
f0=58.75MHz 80dBµ CW
f0=58.75MHz 110dBµ CW
f0=58.75MHz CW level variable
f0=Variable AM20kHz 77.8% 90dBµ
f0=Variable 90dBµ CW
f1=58.75MHz 90dBµ CW (Mixed signal)
f2=55.17MHz 80dBµ CW (Mixed signal)
f3=54.25MHz 80dBµ CW (Mixed signal)
f0=58.75MHz 87.5%
TM modulation ten-step waveform
sync tip level 90dBµ
f1=54.25MHz 95dBµ CW
f1=54.25MHz 75dBµ CW
f1=58.75MHz 90dBµ CW (Mixed signal)
f2=54.25MHz 70dBµ CW (Mixed signal)
f0=4.5MHz 90dBµ FM400Hz±25kHz dev
f0=4.5MHz level variable FM400Hz±25kHz dev
f0=4.5MHz 90dBµ AM400Hz 30%
f0=4.5MHz 90dBµ CW
TYPICAL CHARACTERISTICS
THERMAL DERATING (MAXIMUM RATING)
1750
1500
1250
1225
1000
750
637
500
250
0
-20 0 25 50 75 100 125 150
AMBIENT TEMPERATURE Ta (°C)
5
Share Link: 