General Description
The MAX548A/MAX549A/MAX550A serial, 8-bit voltage output digital-to-analog converters (DACs) operate from a single +2.5V to +5.5V supply. Their ±1LSB TUE specification is guaranteed over temperature. Operating current (supply current plus reference current) is typically 75µA per DAC with VDD= 2.5V. In shutdown, the DAC is disconnected from the reference, reducing current
drain to less than 1µA. The MAX548A/MAX549A allow each DAC to be shut down independently.

FEATUREs
♦ +2.5V to +5.5V Single-Supply Operation
♦ ±1LSB (max) TUE
♦ Power-On Reset Clears All Registers to Zero
♦ Low Operating Current:
  150µA (MAX548A/MAX549A, VREF= +2.5V)
  75µA (MAX550A, VREF= +2.5V)
♦ 1µA Shutdown Mode
♦ 10MHz, 3-Wire Serial Interface Compatible with SPI/QSPI and Microwire
♦µMAX Package—50% Smaller than 8-Pin SO
♦ Independent Shutdown of DACs (MAX548A/MAX549A)

APPLICATIONs
    Battery-Powered Systems
    VCXO Control
    Comparator-Level Settings
    GaAs Amp Bias Control
    Digital Gain and Offset Control