General Description
The MAX11206/MAX11207 are ultra-low-power (< 300FA active current), high-resolution, serial-output ADCs. These devices provide the highest resolution per unit power in the industry, and are optimized for applications that require very high dynamic range with low power, such as sensors on a 4mA to 20mA industrial control loop. Optional input buffers provide isolation of the signal inputs from the switched capacitor sampling network allowing these converters to be used with high-impedance sources without compromising available dynamic range or linearity. The devices provide a high-accuracy internal oscillator that requires no external components.

FEATUREs
♦ 20-Bit Noise-Free Resolution
♦ 570nVRMS Noise at 10sps, ±3.6VFS Input
♦ 3ppm INL (typ), 10ppm (max)
♦ No Missing Codes
♦ Ultra-Low Power Dissipation
    Operating-Mode Current Drain < 300µA (max)
    Sleep-Mode Current Drain < 0.4µA
♦ Programmable Gain (1 to 128) (MAX11206)
♦ Four SPI-Controlled GPIOs for External Mux Control
♦ 2.7V to 3.6V Analog Supply Voltage Range
♦ 1.7V to 3.6V Digital and I/O Supply Voltage Range
♦ Fully Differential Signal and Reference Inputs
♦ High-Impedance Inputs Optional Input Buffers on Both Signal and Reference Inputs
♦ > 100dB (min) 50Hz/60Hz Rejection
♦ SPI-, QSPI™-, MICROWIREM-Compatible Serial Interface
♦ On-Demand Offset and Gain Self-Calibration and System Calibration
♦ User-Programmable Offset and Gain Registers
♦ -40°C to +85°C Operating Temperature Range
♦ ±2kV ESD Protection
♦ Lead(Pb)-Free and RoHS-Compliant QSOP Package

APPLICATIONs
    Sensor Measurement (Temperature and Pressure)
    Portable Instrumentation
    Battery Applications
    Weigh Scales